Licensed HVAC Contractor  |  Palm Beach County, FL  |  Since 1996

Heat Pump Installation. Sized For The Summer.

New heat pump systems for homes and businesses across Palm Beach County. Here the cooling load is the big one, so the system gets sized for August — and the heating capacity follows from that rather than the other way round.

Licensed, Insured & Code-Compliant  •  License #CAC057209  •  Load Calculation Before Quote  •  Financing Available

One SystemHeating And Cooling In One Unit
Cooling FirstThe Load That Sets The Size
Strip HeatSized As Backup, Not Primary
CAC057209Licensed & Insured
Sized On The Cooling LoadIn this climate cooling is the demanding job. Get that right and Florida heating capacity comes with it.
Strip Heat Kept SmallElectric backup heat is expensive to run. Correct sizing means it rarely engages instead of carrying the load.
Coastal ConsideredSalt air shortens equipment life near the water, so placement and protection are part of the specification.

Why It Suits Here

The Default System In Florida

Advanced Cooling and Heating is a licensed Florida HVAC contractor (License #CAC057209), established in 1996 and based in West Palm Beach. A heat pump is the standard choice in Palm Beach County, and for a straightforward reason: it is one machine doing what would otherwise need two.

Heat pumps work by moving heat rather than making it, which is why they are efficient. In colder states that gets harder as the outdoor temperature drops, and a backup heat source becomes essential. Here, a cold front rarely goes low enough for that to matter — there is plenty of heat in the outdoor air to collect.

So the sizing question is settled by summer. Cooling is the demanding load in this county by a wide margin, and a system correctly sized for August will comfortably handle January. That is the opposite of how the same equipment gets specified further north, and it is why northern sizing advice misleads here.

Common ReasonsNew build, replacing a straight-cool AC, or aging equipment
Sizing BasisLoad calculation driven by cooling demand
Also SpecifiedAuxiliary strip heat, electrical supply, ductwork
LicenseFlorida HVAC Contractor #CAC057209
FinancingAvailable — see options

The Part Nobody Explains

Auxiliary Strip Heat

Every heat pump here has electric backup heat built into the air handler. How it is sized and configured makes a real difference to your winter bills, and it is the least discussed part of the specification.

  • Strip heat is resistance heating — the same principle as a toaster
  • It is far more expensive to run than the heat pump itself
  • It exists as backup for the coldest hours, not as the heating system
  • Correctly sized equipment means it rarely engages at all
  • An undersized heat pump leans on it, and the bill shows that
  • A miswired thermostat can call for it unnecessarily

If Your Winter Bill Spikes

That is usually strip heat carrying more of the load than it should — either because the heat pump is undersized, is low on charge, or the controls are calling for backup too eagerly.

It is worth diagnosing rather than accepting. The fix is often configuration rather than equipment.

Get It Checked

The Installation

What Gets Done

A heat pump install is an air conditioner install plus the heating side. These are the steps that decide whether the system reaches its rated performance.

Load Calculation

Worked out for the building as it stands, driven by cooling demand, before any equipment is selected.

Equipment Matched

Condenser and air handler specified as a pair. Mismatched components never reach their rated efficiency.

Electrical Verified

Supply and panel capacity confirmed for both the compressor and the strip heat, which is the larger electrical draw.

Hurricane-Rated Pad

Condenser mounted to Florida wind load standards, with placement chosen for airflow and salt exposure.

Charge By Weight

Refrigerant weighed in to specification, then verified by superheat and subcooling rather than guessed.

Tested In Both Modes

Commissioned in cooling and in heating, with airflow balanced and the thermostat configured for correct changeover.

FREQUENTLY ASKED QUESTIONS ABOUT HEAT PUMP INSTALLATION

Yes. Heat pumps provide both cooling and heating in one system, making them ideal for Florida’s mild winters and long cooling seasons. A properly installed heat pump improves efficiency and reduces reliance on electric strip heating.

Heat pump installation near me services include Manual J load calculation, equipment sizing, condenser and air handler installation, refrigerant line configuration, electrical verification, thermostat staging setup, and full performance testing in both cooling and heating modes.

Most residential heat pump installations in Florida projects are completed within one to two days, depending on ductwork modifications and electrical requirements.

Yes. Installation applies to new system setups or first-time integration. Replacement involves removing and upgrading an existing heat pump unit.

Advanced Cooling and Heating, headquartered in West Palm Beach and serving all of Southeast Florida and surrounding areas, installs high-efficiency heat pump systems specifically engineered for Florida’s climate to reduce electrical consumption, enhance humidity control, and deliver reliable, stable performance during extended cooling demand.

GET FAST, PROFESSIONAL HVAC SERVICES FROM LICENSED LOCAL EXPERTS

From emergency AC repairs and refrigerant leak detection to full HVAC system replacement, ductwork installation, heat pump service, and indoor air quality solutions, our HVAC technicians are ready to respond.

If you are experiencing no cooling, system failure, electrical issues, or AC leaks, call now for priority dispatch at 561-697-4247.

System Failed And Need It Now?

An emergency replacement removes your choice of equipment, timing and financing, which is why it costs more. Call and we will confirm whether it really is finished — a repair that buys you a few weeks to decide properly is often the better outcome.

Call Now: (561) 697-4247

Licensed • Insured • Code-Compliant • Financing Available

One System, Specified Properly.

Book an evaluation and you will get a load calculation, matched equipment sized on your building's cooling demand, strip heat configured as backup rather than as the heating system, and a written proposal.

Heat Pump Installation Palm Beach County Florida  |  Load-Calculated Sizing  |  Residential & Commercial  |  Licensed HVAC Contractor #CAC057209 Since 1996